Replace a Broken Hubba Hubba Tent Pole Section (2022-2024)

By Therm-a-Rest® - Sleeping Pads, Bags & Outdoor Comfort | Published: 2026-11-04

Category: How-to Guides

Learn how to replace a snapped pole section on your 2022-2024 MSR Hubba Hubba tent, from identifying the right pole set to a field-ready repair you can trust.

Quick answer

To fix a snapped pole section on a 2022-2024 MSR Hubba Hubba, replace the affected pole set with the genuine replacement set sized for your tent model, then rethread the shock cord and test the assembly before your next trip.

Why a model-specific pole set matters

Hubba Hubba pole sets are sized for each tent model, so a set for the 1-person tent will not fit the 2- or 3-person version. Using the wrong set can leave you with poles that are too short or too long, which puts stress on the tent body and fly.

The replacement sets are designed specifically for tents manufactured between 2022 and 2024. If your tent falls outside that window, check with the manufacturer for the correct part rather than forcing a set that may not match.

When to replace the whole set instead of one section

If only one section is cracked or snapped, you may be able to swap just that section if you have a spare. However, if the break is at a joint, the shock cord is stretched, or multiple sections show wear, replacing the entire pole set is the more reliable fix.

Inspect the shock cord while you have the poles apart. A frayed or overstretched cord will cause the poles to flop or fail to snap together, so replace it if it shows signs of wear.

Step-by-step pole section replacement

Identify the broken section and your tent model: Lay the tent poles out flat and locate the snapped or cracked section. Note whether your Hubba Hubba is the 1, 2, or 3-person model so you order the correct pole set. Check the tent's model year on the label or tag; the replacement sets only fit 2022-2024 models.
Order the correct replacement pole set: Purchase the Hubba Hubba Pole Set that matches your tent size. Each set is specifically sized for its corresponding tent model. Do not substitute a set from a different model year or tent size; it may not fit.
Remove the old pole set: If you are replacing the entire set, disconnect the poles from the tent and set the tent body aside. If you are replacing only one section, carefully pull the shock cord through the broken section and remove it. Work on a clean, flat surface so small parts like end caps or ferrules don't get lost.
Thread the shock cord through the new section: If reusing the existing shock cord, feed it through the new pole section, making sure it runs straight and does not twist. If the cord is worn, now is the time to replace it. Tie a temporary knot at the end of the cord to prevent it from pulling back through while you work.
Reassemble the pole set: Connect the new section to the adjacent sections, ensuring the ferrules seat fully. If you replaced the whole set, assemble the poles according to the set's configuration. Check that each joint snaps together securely and the shock cord holds tension.
Test the repair before heading out: Set up the tent with the repaired poles and check for proper fit, tension, and stability. Make sure the poles slide through the sleeves or clips without snagging. A quick backyard pitch can reveal issues before you rely on the repair in the field.

Product facts

Hubba Hubba™ Tent Poles (2022-2024): Replacement pole sets for MSR Hubba Hubba tents manufactured between 2022 and 2024, available in 1, 2, and 3 Pole Set configurations. Choosing the set that matches your tent model ensures correct fit and restores the tent's structure without guesswork.
Hubba Hubba™ Tent Poles (2022-2024)