How to Replace Hubba NX Series Tent Poles

Quick Answer

To replace Hubba NX series tent poles, identify your tent model and manufacturing year, order the correct genuine replacement set, then remove the old pole and insert the new one through the pole sleeve.

Step-by-Step Pole Replacement Process

1. Identify Your Tent Model and Year: Check the tag sewn inside your tent or the original packaging. Hubba NX series poles from 2014-2021 are compatible with the replacement sets. A common mistake is ordering poles for a different generation—verify the model name (e.g., Hubba Hubba NX) and year before purchasing. Write down your tent model and year before ordering.
2. Order the Correct Pole Set: Select the replacement set that matches your tent's pole configuration (e.g., two-pole or three-pole hub design). Choose between Easton Syclone composite (black) or DAC aluminum (red or red/gray) based on your original poles or desired upgrade. A common mistake is assuming all Hubba NX poles are identical—Hubba Hubba NX uses a different set than Mutha Hubba NX. Match the pole material to your terrain: Syclone for durability, aluminum for weight savings.
3. Remove the Old Pole: Unclip the old pole from the tent grommets and slide it out of the pole sleeve. If the pole is broken, use caution to avoid tearing the sleeve with sharp edges. A common mistake is pulling too hard on a stuck pole—instead, gently wiggle it free to avoid damaging the fabric. Inspect the pole sleeve for tears before inserting the new pole.
4. Insert the New Pole: Starting from one end, feed the new pole through the pole sleeve, keeping the sections aligned. Push from the hub end to avoid forcing the pole tips against the sleeve seam. A common mistake is twisting the pole during insertion, which can cause the sections to separate inside the sleeve. Work slowly and keep the pole straight as you feed it through.
5. Secure and Test the Setup: Clip the pole ends into the tent grommets and snap the pole clips onto the tent body. Erect the tent to ensure the poles create a balanced shape without sagging or excessive tension. A common mistake is over-tightening the pole ends, which can stress the grommets and cause the pole to bow. Check all pole clips are secure before staking the tent.

Product Facts

• Hubba™ NX Series Tent Poles (2014-2021): Available in Easton Syclone composite (black) or DAC aluminum (red or red/gray) options. Choose Syclone composite for better durability in rocky terrain, or DAC aluminum for a lighter pack weight. Both match the original pole geometry for a secure fit.