How to Replace Hubba Hubba Tent Poles and Parts
By Therm-a-Rest® - Sleeping Pads, Bags & Outdoor Comfort | Published: 2026-10-28
Category: How-to Guides
Learn step-by-step how to replace tent poles and parts for your MSR Hubba Hubba LT or HD tent. Keep your shelter in top shape with genuine replacement parts.
Quick answer
To replace Hubba Hubba tent poles, first identify your model (LT or HD) and size, then order a genuine pole set. Follow these steps to swap the old poles without damaging the tent fabric.
Why use genuine MSR replacement parts?
Genuine Hubba Hubba pole sets and rainflies are designed specifically for your tent model. Aftermarket poles may not match the exact length, ferrule size, or clip placement, leading to poor fit and potential damage in wind or rain.
The Hubba Hubba LT and HD models have different pole geometries and rainfly attachment points. Using the correct parts ensures your tent pitches taut and stays waterproof.
Common mistakes to avoid
Don't force a pole into a sleeve or clip that seems too tight. This can tear the fabric or bend the pole. Instead, double-check that you have the correct pole set for your specific model and size (1-, 2-, or 3-person).
Avoid mixing old and new pole sections. If one pole segment is damaged, the entire pole set should be replaced to maintain consistent tension and alignment.
Step-by-step replacement guide
- Identify your tent model and size: Check the tag inside your tent or the original packaging to confirm whether you have a Hubba Hubba LT or HD, and the person capacity (1P, 2P, or 3P). This information is required to order the correct pole set. Ordering the wrong model can lead to poor fit; double-check before purchasing.
- Remove the old pole set: Unclip all pole clips from the tent body. Gently slide the poles out of the pole sleeves, taking care not to snag the fabric. If a pole is broken, tape the broken section before removal to avoid scratching the tent. Always remove poles carefully to avoid tearing the sleeve or tent body.
- Install the new pole set: Starting at one corner, feed the new pole through the sleeve or clip it into the first clip. Work your way around the tent, clipping each section. Ensure the pole ends are fully seated in the corner grommets. If the pole doesn't slide easily, you may have the wrong size or model; do not force it.
- Test the pitch and adjust: Once all poles are in place, pitch the tent as usual. Check that the fly attaches properly and the tent stands taut. If the pitch is loose or the fly doesn't fit, verify the pole set matches your model. A proper pitch means the tent should stand without sagging and the fly should attach without straining the poles.
Genuine replacement parts available
- Hubba Hubba™ LT/HD Tent Parts: MSR Hubba Hubba LT/HD Tent Parts include genuine replacement rainflies and pole sets designed for current Hubba Hubba HD and LT models in 1-, 2-, and 3-person sizes. Choosing the right model-specific part ensures your tent pitches correctly and stays reliable on the trail.
Hubba Hubba™ LT/HD Tent Parts
